Our Services:


Tank & Line Integrity Testing

The majority of existing underground fuel storage tanks are manufactured from steel with steel suction and vent lines. Twin-skin tanks have either a fiberglass or steel inner and a fiberglass outer. The outer skin acts as secondary containment should the inner skin fail. 

The life expectancy of a steel tank and lines is twenty to thirty years where that system is installed to the appropriate standards in an ideal environment.

Fuel Doctors have had to replace or abandon numerous steel tanks and lines over the years that did not make it to their first ten years, due to site specific instillation deficiencies and/or a lack of preventative maintenance.

Tank Extraction
(Single Wall Extraction)
Tank Installation
(Double Containment Tank)
Manway Acess
(Man way Access)
Abandon In Situ
(Abandoned In Situ)

High rise buildings with emergency power instillations place the storage tank at the lowest level in the building, up to six floors below ground. Life expectancy of these buildings can average seventy years. Consequently, preventative maintenance of the fuel containment system is a must to maintain service life and minimise environmental impact to the surrounding area.

Tank Cleaning Tender NAB High Rise NAB Basement

Ground water and condensation are the main catalysts for tank and line failure. Corroded vent lines will allow ground water to flow freely into the tank, compromising fuel quality and tank shell life. Without integrity testing, these issues only become apparent due to engine damage by contaminated fuel.

Catastrophic Tank Failure
(Catastrophic Tank Failure)

Corroded Fuel Vent Lines
(Corroded Fuel Vent Lines)

90% of the tanks extracted by Fuel Doctors since 1992 have rusted from the inside. Integrity testing can determine ingress or egress and should be undertaken annually as part of a preventative maintenance plan.

(Integrity Testing Failed Tank)

(Inspecting for Point of Ingress)

(Integral Corrosion of Seam Weld)

(Ingress Discovered)